Sony HANDYCAM HVR-M35U Operating Instructions Manual Download Page 74

Page: 74 / 112

Chapter 5

Adjusting and Setting Through Menus

Cha

dju
s

ting
a

Se
tt

ing
T

ugh

nu
s

Operating Menus

IN/OUT

REC

i.LINK SET

(pages 45, 67)

Adjusts the down conversion format. This menu is available when [HDV/DV SEL] is set to
[AUTO] or [HDV].

HDV

DV CONV

OFF :

Disables down conversion.

DVCAM :

Down converts to DVCAM format.

DV SP :

Down converts to DV SP format.

DOWN CONVERT

This setting is available when [HDV

DV CONV] is set to [DVCAM] or [DV SP].

SQUEEZE :

Plays back with a compressed horizontal screen image and maintains all
images on display. Images appear vertically long.

EDGE CROP :

Plays back with both left and right sides of the screen images cut off and
maintains the original image appearance.

DOWN CONV AU

Selects 2 channels to output from the

HDV/DV jack during playback of HDV recorded in 4-

channel audio.

CH1, CH2 :

Outputs signals of channel 1 and 2 from the

HDV/DV jack.

CH3, CH4 :

Outputs signals of channel 3 and 4 from the

HDV/DV jack.

• When [DVCAM] is selected, there are some limitations, as described below.

– ATN (Absolute Track Number) outputs the value counted in DVCAM format during

playback at regular speed (×1) or recording of the internal color bars only.
During playback at irregular speeds other than those described above, ATN outputs the
value of a tape recorded in HDV format.

– When the unit is playing back at regular speed (×1) and detects a blank portion on the

tape, the unit counts the blank portion as ATN-formatted in DVCAM.

– When using a duplicating function that is equipped with a device such as the DSR-25/45/

50, select [DVCAM].

– Please note that a duplicated tape and the source tape recorded in HDV format with

[DVCAM] selected do not share the same ATN (Time code value is displayed correctly).

• When you change the video format setting of [DOWN CONVERT] of [i.LINK SET] in the [IN/

OUT REC] menu, the video signal output from the COMPONENT OUT jacks, S VIDEO
OUT jack, or VIDEO OUT jack may be distorted for a moment.

• Before changing your setting, be sure to disconnect the i.LINK cable. If you change the

setting while i.LINK is connected, the video device may not recognize the new setting.

• When you select [EDGE CROP], the outputs of S VIDEO and VIDEO are limited.

For details,

see page 91

• During playback of HDV recorded in 2-channel audio, the signals of channel 1 and 2 are

output from the

HDV/DV jack regardless of the [DOWN CONV AU] setting.

• At the time the [DOWN CONV AU] setting change actually takes effect, noise may occur.

CROP
ADJUST

(page 45)

Adjusts the position of edge cropping when down converting 16:9 to 4:3 aspect ratio.
Adjust the position of the crop marker by pressing the

buttons to move either left or

right, and then press the EXEC button. (You can also use the

buttons.)

• Edge cropped DV wide screen pictures cannot be output from the

HDV/DV jack.

• For edge-crop output of DV wide screen pictures, only even numbered values can be

selected when making adjustments.

Icon/Menu

Submenu

Setting

Notes

Summary of Contents for HANDYCAM HVR-M35U

















































































































Search results

Summary of Contents for HANDYCAM HVR-M35U

Reviews:

Related manuals for HANDYCAM HVR-M35U

Brands by name

Popular brands

Sony HANDYCAM HVR-M35U, Operating Instructions Manual

Search results

Summary of Contents for HANDYCAM HVR-M35U

Reviews:

Related manuals for HANDYCAM HVR-M35U

Brands by name

Popular brands