64
Chapter 4
Dubbing to Other Equipment Using the i.LINK Jack, Duplication, Audio Dubbing, and Connecting a Computer
Chapt
er
4
D
ub
bi
ng to
O
th
e
r Equ
ipmen
t Us
ing t
he i.
LI
NK J
a
c
k
, Dupl
ic
ati
on,
A
udio
Du
bb
ing,
and
Con
nec
ting a Compu
te
r
Duplication (Generating a work tape with the same time code)
Warning messages on duplication
If an error occurs during duplication, a STOP/CAUTION number and warning message will be displayed on the LCD
monitor and the video output screen.
The following table lists these warnings and messages.
If a warning message is displayed, check this table and take the appropriate action.
When a warning message other than those above is displayed, consult your Sony dealer.
STOP/
CAUTION
No.
Warning Message
Cause/Remedy
00
RECORDER:
INPUT SELECT is not set to
HDV/DV.
The INPUT SELECT switch on the recorder (the unit) is not set to HDV/DV.
t
Set the INPUT SELECT switch to HDV/DV.
01
i.LINK :
Cable not connected.
The i.LINK cable is not connected correctly.
t
Connect the i.LINK cable correctly.
02
i.LINK :
Check i.LINK connection.
There are multiple i.LINK connections or the i.LINK connection is looped.
t
You cannot connect multiple devices. Connect only one player to the unit.
03
i.LINK :
Check i.LINK connection.
The i.LINK cable has been unplugged and plugged in again.
t
Check the i.LINK cable connection. Try to duplicate again.
10
PLAYER:
Recording.
The player is in the recording mode.
11
PLAYER:
No cassette
There is no cassette in the player.
12
PLAYER:
Cannot control.
The player cannot be operated.
13
PLAYER:
Cannot control.
The player rejects operations.
14
PLAYER:
Cannot control.
The player is disabled or is in a different mode than the recorder (the unit) has
requested.
15
PLAYER:
Cannot control.
The player is in an inappropriate condition.
16
PLAYER:
Cannot record due to
copyright protection.
A copyright protected signal is recorded on the cassette in the player.
t
You cannot duplicate the tape with copyright protected signals overlapped.
17
PLAYER:
Error detected.
The player has detected self-diagnostics.
18
PLAYER:
Moisture
Moisture condensation has occurred in the player.
t
Refer to the instruction manual of the player.
20
RECORDER:
No cassette inserted.
There is no cassette in the recorder.
21
RECORDER:
The tape is locked
–check the tab.
The REC/SAVE switch is set to SAVE on the cassette.
t
Slide the REC/SAVE switch to REC on the cassette.
22
RECORDER:
Reinsert the cassette.
The recorder (the unit) detected self-diagnostics.
t
Insert a cassette again.
23
RECORDER:
Re-attach the power source
The recorder (the unit) detected self-diagnostics.
t
Disconnect the power cord from the recorder.
24
RECORDER:
Moisture condensation.
Eject the cassette
Moisture condensation has occurred while the cassette is in the recorder (the unit).
t
Remove the cassette and leave the unit for more than one hour.
25
RECORDER:
Moisture condensation.
Turn off for 1H.
Moisture condensation has occurred while the cassette is not in the recorder.
t
Leave the unit for more than one hour.
26
RECORDER:
Dirty video head.
Use a cleaning cassette.
The recorder’s (the unit) video heads are clogged.
t
Clean the video heads with the supplied cleaning cassette
Note
