26
Chapter 1
Overview
Chap
te
r 1
O
v
e
rv
ie
w
Displaying Various Data
i
Time counter (time code/user bits/count value of
the counter) indicator
Displays the count value of the counter, time code, or
user bits. By pressing the COUNTER SELECT button
on the front panel, you can select the item to be
displayed.
When the time code is displayed,
appears to its left.
In the drop frame mode, a period is displayed between
the minutes and seconds (i.e., 00:12.58:00).
When the user bits are displayed,
appears to their
left.
When the count value of the counter is negative, “–”
appears as the first digit (leftmost digit). When that
value is positive, the first digit is blank.
The count value of the counter consists of seven digits.
If the self-diagnostic function is enabled, diagnostics
code numbers are displayed.
When you playback a tape without a time code or with
a time code recorded in different formats, the time code
cannot be displayed correctly.
j
Remaining tape time indicator
Displays the remaining tape time.
For details, see “
REMAINING” in the “DISPLAY SET”
menu on page 78.
When you insert a cassette of which the tape has been
rewound to the beginning, this indicator does not show
the remaining tape time. The remaining tape time is
displayed after the tape runs for a while.
k
INPUT SELECT indicator
Changes according to the position of the INPUT
SELECT switch. ([HDV/DV IN], [S VIDEO IN] or
[VIDEO IN])
l
(Index) indicator
Displays
when an index has been marked.
m
Search indicator
Displays the search mode when you search for scenes
using the Remote Commander.
For details on the search function, see “Searching using the
search function” on page 42.
n
Black signal indicator
Displays a Black signal indicator when [COLOR BAR]
is set to [ON] and [TYPE] is set to [BLACK] in
[COLOR BAR] of the [IN/OUT REC] menu.
For details on color bar type, see “COLOR BAR” in the “IN/
OUT REC” menu on page 76.
o
Audio mode indicator
During recording in DV mode, displays
when you
select [FS32K] for [AUDIO MODE] in the [AUDIO
SET] menu. When you select [FS48K],
is
displayed. During recording in HDV mode, displays the
audio mode with either
2CH
or
4CH
.
During DV format playback or audio dubbing, displays
the audio mode recorded on the tape with either
or
. During HDV format playback, displays the audio
mode recorded on the tape with either
2CH
or
4CH
.
When DV signals are input from the HDV/DV jack,
displays the audio mode with either
or
. When
HDV signals are input from the HDV/DV jack,
displays the audio mode with either
2CH
or
4CH
.
For DV format, signals other than DVCAM lock mode
will become non-standard audio and
/
will
be displayed during playback or when the signal is input
from the HDV/DV jack.
p
Date/time indicator
When you press the DATA CODE button of the Remote
Commander or set [DATA CODE] in the [DISPLAY
SET] menu to [DATE], you can display the recording
date/time.
For details on the date/time indicator, see “Displaying
information (data codes) recorded on a tape” on page 40.
Time counter screen
To display the time counter on the LCD monitor, press
the DISPLAY button. On the time counter screen, the
time data (count value of the counter/time code/user
bits) is displayed.
While the time counter is displayed, the position of the
time counter can be moved up and down by pressing the
J
/
j
buttons. When the small size time counter is
displayed, the position of the time counter can be moved
not only up and down, but also to the left and right by
pressing the
K
/
k
buttons.
Note
Note
TC
UB
Note
