1-3
ENGLISH
ENGLISH
HDR-XR100/XR100E/XR101/XR105E/XR106E/XR200/XR200E/XR200V/XR200VE_L2
E
E
E
E
E
E
E
E
E
E
E
E
E
Block
Function
6
2
6
2
6
2
6
2
6
2
6
2
6
2
6
2
9
1
9
4
9
4
9
5
9
6
Detailed
Code
0
0
0
1
0
2
0
3
1
0
1
1
1
2
2
0
0
1
0
0
0
2
0
0
0
0
Symptom/State
Handshake correction function does not
work well. (With PITCH angular
velocity sensor output stopped.)
Handshake correction function does not
work well. (With YAW angular velocity
sensor output stopped.)
Abnormality of IC for steadyshot.
IC for steadyshot and micro controller
communication abnormality among.
Shift lens initializing failure.
Shift lens overheating (Pitch)
Shift lens overheating (Yaw)
Abnormality of thermistor.
Abnormality when flash is being
charged.
Fault of writing or erasing the flash
memory
BGM data error
GPS hardware error
Map area mount error
Self-diagnosis Code
Repaired b
y:
Correction
XR100/XR100E/XR101/XR105E/XR106E:
Inspect PITCH angular velocity sensors (SE6502 on the FR-297
board) peripheral circuits.
XR200/XR200E/XR200V/XR200VE:
Inspect PITCH/YAW angular velocity sensors (SE6501 on the
FR-296 board) peripheral circuits.
XR100/XR100E/XR101/XR105E/XR106E:
Inspect YAW angular velocity sensors (SE6501 on the FR-297
board) peripheral circuits.
XR200/XR200E/XR200V/XR200VE:
Inspect PITCH/YAW angular velocity sensors (SE6501 on the
FR-296 board) peripheral circuits.
XR200/XR200E/XR200V/XR200VE:
Refer to [1-4-1. E : 62 : 02 (Abnormality of IC for Steadyshot)
Occurred].
XR200/XR200E/XR200V/XR200VE:
Inspect the steadyshot circuit (IC5506 on the LD-244 board).
XR200/XR200E/XR200V/XR200VE:
Replacement of lens block. If an error occurs again, replace the
LD-244 board. (Note)
XR200/XR200E/XR200V/XR200VE:
Refer to [1-4-2. E : 62 : 11 (Shift Lens Overheating (Pitch))
Occurred].
XR200/XR200E/XR200V/XR200VE:
Refer to [1-4-3. E : 62 : 12 (Shift Lens Overheating (Yaw))
Occurred].
XR200/XR200E/XR200V/XR200VE:
IRefer to [1-4-4. E : 62 : 20 (Abnormality of Thermistor)
Occurred].
XR200/XR200E/XR200V/XR200VE:
Checking of flash unit or replacement of flash unit.
Inspect the flash memory (IC2101 on the VC-548 board).
XR200/XR200E/XR200V/XR200VE:
Inspect the flash memory (IC2101 on the VC-548 board). If it is
OK, check the CPU (IC1701 on the VC-548 board).
XR200V/XR200VE:
Check whether the flexible board of the GPS module is broken,
and check whether it is inserted imperfectly. If there is no
problem the flexible board, inspect or replacement of the GPS
module.
XR200V/XR200VE:
Inspect or replacement of the hard disk drive.
Note:
When the lens block was replaced, start the Adjust Manual in the Adjust Station and execute the necessary adjustment items.
After the adjustment, make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in the handheld operation.
