Dubbing/Editing
95
Du
b
b
in
g
/E
d
itin
g
[Completed.] appears when the recording is
finished.
5
Rewind the tape on your VCR, then
play back in slow mode.
5 opening numbers for each [IN] and
closing numbers for each [OUT] appear.
6
Take a note of the opening number
value of each [CUT-IN] and the closing
number value of each [CUT-OUT],
then calculate the average number
value for each [CUT-IN] and [CUT-
OUT].
7
Touch [CUT-IN].
8
Touch
/
to select the average
number value for [CUT-IN], then
touch .
The calculated start position for recording
is set.
9
Touch [CUT-OUT].
10
Touch
/
to select the average
number value for [CUT-OUT], then
touch .
The calculated stop position for recording is
set.
11
Touch [END] twice.
Recording the selected scenes as
programs
When you are performing a digital program
edit for the first time to a tape in a VCR, go
through the procedures described in Steps 1
and 2 (p. 91 to p. 94) beforehand.
b
Note
• You cannot dub the title or display indicators.
However, you can dub the title which has already
been recorded on a tape.
1
Prepare a cassette or a “Memory
Stick.”
Insert a tape to be played back into the
camcorder.
When you are recording on a tape, insert a
cassette for recording into your VCR.
When you are recording on a “Memory
Stick,” insert a “Memory Stick” into your
camcorder.
2
Touch .
3
Touch [MENU].
Completed.
ADJ TEST
0:00:00:00
PROG. EDIT
0:00:00:00
CUT–IN
-60~+240
0
PROG. EDIT
0:00:00:00
CUT–OUT
-60~+240
0
PROG. EDIT
OK
60min
STILL SET
MEMORY SET
MOVIE SET
ALL ERASE
0:00:00:00
,
continued
