Sony Handycam DCR-TRV460E Operation Manual Download

Page: 14 / 136

Getting started

Step 2: Charging the
battery pack

You can charge the battery by attaching the
“InfoLITHIUM” battery pack (M series)
to your camcorder.

Notes

• You cannot use batteries other than the

“InfoLITHIUM” battery pack (M series) (p. 117).

• Do not short-circuit the DC plug of the AC Adaptor

or battery terminals with any metallic objects. This
may cause a malfunction.

• Use a nearby wall socket when using the AC

Adaptor. Disconnect the AC Adaptor from the wall
socket immediately if any malfunction occurs.

Lift up the viewfinder.

Attach the battery pack by sliding it in
the direction of the arrow until it
clicks.

With the

mark on the DC plug

facing up, connect the AC Adaptor to
the DC IN jack on your camcorder.

Connect the mains lead to the AC
Adaptor.

Connect the mains lead to the wall
socket.

To the wall socket

DC plug

DC IN jack

Mains lead

AC Adaptor

Battery pack

mark

Summary of Contents for Handycam DCR-TRV460E









































































































































Search results

Summary of Contents for Handycam DCR-TRV460E

Reviews:

Related manuals for Handycam DCR-TRV460E

Brands by name

Popular brands

Sony Handycam DCR-TRV460E, Operation Manual

Search results

Summary of Contents for Handycam DCR-TRV460E

Reviews:

Related manuals for Handycam DCR-TRV460E

Brands by name

Popular brands