Sony HANDYCAM DCR-PC106E Operation Manual Download Page 99

Page: 99 / 104

Quick R

fere

nce

Quick Reference

Remote Commander

Remove the insulation sheet before using the
Remote Commander.

PHOTO button (p. 25)

SEARCH M. button* (p. 41)

buttons* (p. 41)

Video control buttons (Rewind,
Playback, Fast-forward, Pause, Stop,
Slow) (p. 36)

ZERO SET MEMORY button* (p. 41)

Transmitter

After turning on your camcorder, point
towards the remote sensor to control your
camcorder.

REC START/STOP button (p. 24)

Power zoom button (p. 23)

DISPLAY button (p. 41)

* These buttons are not available during Easy

Handycam operation.

To remove the insulation sheet

To change the button-type battery

While pressing on the tab, insert your
fingernail into the slit to pull out the
battery case.

Remove the button-type lithium battery.

Place a new button-type lithium battery
with the + side facing up.

Insert the battery case back into the
Remote Commander until it clicks.

Insulation sheet

Tab

continued

Summary of Contents for HANDYCAM DCR-PC106E









































































































Search results

Summary of Contents for HANDYCAM DCR-PC106E

Reviews:

Related manuals for HANDYCAM DCR-PC106E

Brands by name

Popular brands

Sony HANDYCAM DCR-PC106E, Operation Manual

Search results

Summary of Contents for HANDYCAM DCR-PC106E

Reviews:

Related manuals for HANDYCAM DCR-PC106E

Brands by name

Popular brands