Sony HANDYCAM DCR-PC106E Operation Manual Download Page 4

Page: 4 / 104

• When removing your camcorder from the

Handycam Station, hold both your camcorder and
the Handycam Station as shown in the following
illustration, and remove it from the Handycam
Station.

Notes

• When disconnecting the AC Adaptor from the

Handycam Station, hold both the DC plug and the
Handycam Station and disconnect the AC Adaptor.

• Be sure to turn the power of your camcorder off

before inserting it into or removing it from the
Handycam Station.

• You may not be able to attach your camcorder to the

Handycam Station when the jack cover is opened or
when the Strap Belt is in the unit and the Handycam
Station.

• Do not connect the A/V connecting cables or the AC

Adaptors to both your camcorder and the Handycam
Station simultaneously while using your camcorder.
This may cause a malfunction.

Summary of Contents for HANDYCAM DCR-PC106E









































































































Search results

Summary of Contents for HANDYCAM DCR-PC106E

Reviews:

Related manuals for HANDYCAM DCR-PC106E

Brands by name

Popular brands

Sony HANDYCAM DCR-PC106E, Operation Manual

Search results

Summary of Contents for HANDYCAM DCR-PC106E

Reviews:

Related manuals for HANDYCAM DCR-PC106E

Brands by name

Popular brands