Personal Audio System
h.ear go (SRS-HG1)
Connecting with a paired BLUETOOTH device
The procedure explained below is for guidance only. For details, refer to the operating instructions supplied with the BLUETOOTH
device.
Do the following before starting.
If you have connected the speaker with another device, turn off the BLUETOOTH function on that device.
Turn down the volume of the BLUETOOTH device.
Stop playback on the BLUETOOTH device to avoid sudden loud sound output from the speaker.
Turn on the speaker.
The (power) indicator lights up in green.
1
Press the FUNCTION button repeatedly until the BLUETOOTH indicator flashes.
The speaker enters the BLUETOOTH mode.
When you turn on the BLUETOOTH mode, the speaker will try to make a BLUETOOTH connection with the last connected
BLUETOOTH device. If the device is nearby, the BLUETOOTH connection establishes automatically and the BLUETOOTH
indicator stays lit. In this case, turn off the BLUETOOTH function on the BLUETOOTH device, or turn off the BLUETOOTH
device.
2
Perform the pairing procedure on the BLUETOOTH device to detect the speaker.
When the BLUETOOTH connection is established, the BLUETOOTH indicator lights up.
3
121
Summary of Contents for H.ear go SRS-HG1
Page 43: ...Help Guide Personal Audio System h ear go SRS HG1 Parts and controls Top and bottom Rear 27 ...
Page 149: ...Select Network 3 Select Connections and then select the icon with Connected using or 4 133 ...
Page 201: ...Related Topic Trademarks 4 589 712 11 2 Copyright 2016 Sony Corporation 185 ...