Sony GXDL52H1 - 52" LCD Flat Panel Display, Manual

Page: 87 / 311

39
GB
GB
No sound/Noisy sound.
Picture displayed, no sound. • Check the volume control.
• Press
on the remote control or + so that Muting disappears
from the screen (page 13).
• Check “Speaker Out” settings (page 29).
Remote control does not operate. • Check the polarity of the batteries or replace the batteries.
• Point the remote control at the remote control sensor of the display.
• Keep the remote control sensor area clear from obstacles.
• Check “Control Setting” (page 29).
• Check whether a cable is connected to the CONTROL S IN
connector (BKM-FW21 not supplied). The remote control cannot be
used while the display is controlled via a CONTROL S connection.
• Fluorescent lamps can interfere with remote control operation; try
turning off the fluorescent lamps.
Cannot connect to the network. • Plug the cable firmly into the REMOTE connector.
• Check the network settings of the PC.
• Reset to the default settings by assigning the “All Reset” setting on
the “Setup” setting menu, and then assign the appropriate settings of
the network again.
• Check the settings in “Network Port.” (page 31)
The display control screen (the
Web screen displaying the
display’s GUI) does not appear. • Click the refresh or reload button on your Web browser.
• Make sure the IP address is correct.
• Use Internet Explorer 6.0 or later.
• Clear the browser cache.
Problem Possible Remedies