![background image](http://html.mh-extra.com/html/sony/gigajuke-nas-e35hd/gigajuke-nas-e35hd_service-manual_420557018.webp)
NAS-E35HD/SS-CE35HD
18
COMMON TEST MODE
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Press three buttons of [
x
], [ENTER], and [
Z
] simultaneously.
3. It enters the common test mode and the “PLAY SLEEP” seg-
ment on the
fl
uorescent indicator tube blinks.
4. Each time the [VOLUME] dial is turned, “VOLUME MIN”
and “VOLUME MAX” are displayed.
5. Each time the [EQ] button on the remote commander is
pressed, “TONE MAX”, “TONE MIN” and “TONE FLAT”
are displayed.
6. To release from this mode, press the [
?/1
] button to turn the
power off.
HDD TEST MODE
The CDDB version display, custom DB initialization, HDD writ-
ing/reading test, HDD test data deletion, format, HDD setup and
initialization mode for factory can be executed in this mode.
Enter The HDD Test Mode
Procedure:
1. In the standby status, press the [
?/1
] button to turn the power
on.
2. Press three buttons of [
l
m
TUNE –], [
m
] and [
Z
] simul-
taneously.
3. When the HDD test mode is activated.
1. CDDB Version Display
The version of CDDB built into HDD is displayed.
Procedure:
1. Enter the HDD test mode.
2. Press the [
M
] [
m
] button to select the “CDDB Version”, and
press the [ENTER] button.
3. The version of CDDB is displayed on the
fl
uorescent indicator
tube.
2. Custom DB Initialization
The initialization of custom DB recorded in HDD is executed.
Procedure:
1. Enter the HDD test mode.
2. Press the [
M
] [
m
] button to select the “Custom Init”, and press
the [ENTER] button.
3. The
following
fi
les in HDD are deleted.
• ROOT\SYSTEM\CCUDB\CCU.EDB
• ROOT\SYSTEM\CCUDB\CCU.IDX
• ROOT\SYSTEM\CCUDB\CCUTOC.IDX
• ROOT\SYSTEM\CCUDB\SCCU.EDB
• ROOT\SYSTEM\CCUDB\SCCU.IDX
• ROOT\SYSTEM\CCUDB\SCCUTOC.IDX
3. HDD Writing/Reading Test
The writing/reading of test data is done to HDD, and whether it
operates normally is checked.
Procedure:
1. Enter the HDD test mode.
2. Press the [
M
] [
m
] button to select the “HDD W/R Test”, and
press the [ENTER] button.
3. The writing reading of the test data is done to HDD, and the
result is displayed.
When the writing/reading of the test data ends normally, the
written test data is deleted.
• W/R Test OK : The writing/reading of the test data ended
normally.
• W/R NG
: Abnormality occurred in the writing/reading
of the test data.
• Erase NG
: It failed in the deletion of the test data.
4. Format
The deletion of all folders and
fi
les in HDD is executed.
Note:
When this mode is executed, all data including the SYSTEM
fi
le in
HDD is deleted.
Execute this mode after it notes it enough when executing it.
Procedure:
1. Enter the HDD test mode.
2. Press the [
M
] [
m
] button to select the “Format”, and press the
[ENTER] button.
3. All folders and
fi
les in HDD are deleted.
5. HDD Setup
The installation of initial data is executed from the USB memory
to HDD.
Note:
The SYSTEM
fi
le and the DEMO tune are copied from USB mem-
ory after all data in HDD is deleted with format when this mode is
executed, and HDD can be returned to the state of initialization (It
takes the time of about 80 minutes).
Execute this mode after it notes it enough when executing it because
format is executed on the assumption of the thing set up.
Procedure:
1. Connect the USB memory where initial data is recorded to the
set.
2. Enter the HDD test mode.
3. Press the [
M
] [
m
] button to select the “Setup”, and press the
[ENTER] button.
4. The following data is copied from the USB memory to HDD.
• ROOT\SYSTEM\TitleUpdater.exe
• ROOT\SYSTEM\TitleUpdaterVersion.txt
• ROOT\SYSTEM\UCODE.DAT
• ROOT\SYSTEM\CDDB\ecddb.idx
• ROOT\SYSTEM\CDDB\ecddb.mdt
• ROOT\SYSTEM\CDDB\elists.db
• ROOT\MUSIC\(File of description to “MUJIC\music.txt”)
6. Initialization Mode For Factory
The user use areas other than the “Sony Demo” artist in HDD are
initialized, and the cold reset is executed.
Procedure:
1. Enter the HDD test mode.
2. Press the [
M
] [
m
] button to select the “FactoryPreset”, and
press the [ENTER] button.
3. Press the [
M
] [
m
] button to select the “OK?”, and press the
[ENTER] button.
4. All
folder/
fi
le in the following folders in HDD is deleted.
• ROOT\SYSTEM\CCUDB
• ROOT\MUSIC (excluding folder/
fi
le that belongs to “Sony
Demo” artist)
5. After initialization ends, the cold reset is executed.
Summary of Contents for GigaJuke NAS-E35HD
Page 99: ...MEMO NAS E35HD SS CE35HD 99 ...