![background image](http://html.mh-extra.com/html/sony/gigajuke-nas-e35hd/gigajuke-nas-e35hd_service-manual_420557017.webp)
NAS-E35HD/SS-CE35HD
17
SECTION 4
TEST MODE
COLD RESET
The cold reset clears all data including preset data stored in the
memory to initial conditions. Execute this mode when returning
the set to the customer.
Procedure:
1. In the standby status, press the [
?/1
] button to turn the power
on.
2. Press three buttons of [
x
], [ENTER] and at last [
?/1
] simulta-
neously.
3. The set enters standby status.
PANEL TEST MODE
Enter The Panel Test Mode
Procedure:
1. In the standby status, press the [
?/1
] button to turn the power
on.
2. Press three buttons of [BACK], [
x
], and [
Z
] simultaneously.
3. When the panel test mode is activated, LEDs and segments of
the fulorescent indicator tube are all turned on.
Version Check
Procedure:
1. In the panel test mode (all LEDs and segments of the fulores-
cent indicator tube are turned on), press the [BACK] button.
2. On the fulorescent indicator tube, model name, destination,
MC version and its last updated date are displayed.
3. Each time [BACK] button is pressed, the display changes start-
ing from MC, GC, GENE, GNS, HDD, USB, CD, CDMA,
CDMB, ST, TA, TM and CLA version this order, and returns to
the MC version display.
4. To release from this mode, press three buttons of [BACK],
[
x
], and [
Z
] simultaneously.
Key Test Mode
Procedure:
1. In the panel test mode (all LEDs and segments of the fulores-
cent indicator tube are turned on), press the [ENTER] button.
2. The message “KEY0 VOL0” displayed. Whenever any but-
tons are pressed and the [VOLUME] dial is turned, the value is
changed.
3. To release from this mode, press three buttons of [BACK],
[
x
], and [
Z
] simultaneously.
CD SHIP MODE
This mode can run the CD sled motor optionally. Use this mode,
for instance, when cleaning the optical pick-up.
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Con
fi
rm there is no disc in all trays.
3. Press the [FUNCTION] button to select CD function.
4. Press two buttons of [OPTIONS] and [
?/1
] simultaneously.
5. Set to the CD ship mode. (chucking on)
6. After blink “STANDBY”, “LOCK” is displayed, disconnect
the AC plug.
CD TRAY LOCK
This mode is for the antitheft of CD disc in shop. (not for trans-
port)
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Press the [FUNCTION] button to select CD function.
3. Insert a disc.
4. While pressing the [
x
] button, press the [
Z
] button for more 5
seconds.
5. The message “LOCKED” is displayed and the disc tray is
locked. (Even if exiting from this mode, the disc tray is still
locked)
6. If press the [
Z
] button to eject the disc, the message “LOCKED”
is displayed and can not eject the disc.
7. To release this lock, while pressing the [
x
] button, press the
[
Z
] button for 5 seconds again.
8. The message “UNLOCKED” is displayed and the disc tray is
unlocked.
CD POWER MANAGE
This mode is for switch the CD power supply on/off. Even if this
state pulls out AC plug, it is held.
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Press the [FUNCTION] button to select CD function.
3. Press the [
?/1
] button again to turn the power off (standby).
4. After pressing the [DISPLAY] button on the remote com-
mander, while pressing the [
x
] button, press the [
?/1
] button.
5. It turns power on and display “CD POWER ON” or “CD
POWER OFF”.
CHANGE-OVER THE AM TUNING INTERVAL
(Mexican, Chilean, Peruvian and Argentina models)
The AM tuning interval can be changed over 9 kHz or 10 kHz.
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Press the [TUNER/BAND] button to select TUNER (AM)
function.
3. Press the [
?/1
] button again to turn the power off (standby).
4. After pressing the [DISPLAY] button on the remote com-
mander, while pressing the [TUNE +
M L
] button, press
the [
?/1
] button.
5. It turns power on and display “9k STEP” or “10k STEP”, and
thus the tuning interval is changed over.
CD SHIP AND COLD RESET
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Con
fi
rm there is no disc in all trays.
3. Press the [FUNCTION] button to select CD function.
4. Press three buttons of [OPTION], [BACK] and [
?/1
] simulta-
neously.
5. After blink “STANDBY”, “LOCK” is displayed, disconnect
the AC plug.
Summary of Contents for GigaJuke NAS-E35HD
Page 99: ...MEMO NAS E35HD SS CE35HD 99 ...