NAS-S55HDE.GB.3-277-228-
1
(1)
GB
Tips
If you experience noise in an FM stereo broadcast,
enter the Options menu and select [Setting] – [FM
mode] – [Monaural]. The reception will no longer be
stereo, but it will be clearer. To change back to stereo
reception, do the same procedure and select [Auto
stereo].
For better broadcast reception, try changing the
direction or location of the antenna. For example,
position the antenna near or outside a window. If the
reception does not improve, it is recommended to
connect a commercially available external antenna.
Receiving a DAB service*
Before you can receive DAB services, the
broadcast components (service components)
must first be registered by conducting a DAB
Initial Scan (see “Performing DAB Initial Scan”
on page 54).
Press DAB, or enter the HOME menu
and select [DAB].
The DAB main display appears and the unit starts
receiving the services.
About the DAB main display
Name of service
Service Label and frequency
DLS (Dynamic Label Segment)
Ensemble Label
About DAB service component list
Service number
Other operations
To
Do the following:
Select different
services
Press
/
repeatedly to
select the desired service.
Press
to display the service
component list, press
/
to
select the desired service, and
then press ENTER.
Press the corresponding
numeric button to select the
service number of the desired
service.
Switch between
the primary
and secondary
components
Press
/
.
Switch between
“auto tuning”
and “preset
tuning”*
1
Enter the Options menu and
select [Mode switch].
*
1
When you switch from “auto tuning” to “preset tuning”:
The unit changes to the preset tuning display and
begins receiving the service for the last preset
number used.
“No preset” appears in the preset tuning display if
the last preset number used was cleared.
* For the UK model only
Summary of Contents for Giga Juke NAS-S55HDE
Page 5: ... GB ...
Page 134: ...134GB ...
