Sony Giga Juke NAC-HD1E Operating Instructions Manual Download Page 12

Page: 12 / 115

NAC-HD1E.GB.3-213-271-11(1)

Basic operations

Turning on the power





Connect the power cord to a wall

outlet.

The unit automatically turns on, makes

the initial settings, and then turns off.

Press





(power).

The unit turns on.

WARNING

Do not disconnect the power cord while the unit is

making the initial settings. Doing so may cause the

unit to malfunction.

To turn off the power

Press the





button on either the remote

control or the main unit. The power may

not turn off immediately. If it does not,

this indicates that the unit is analyzing the

music data on the HDD (hard disk drive)

(see “About 12 Tone Analysis” on page 45).

While the unit is analyzing the music data,

the illumination panel flashes slowly. If you

want to cancel the analysis and turn off the

power immediately, press the



button. If

you want to turn the power back on, press

the





button.

Tip

This unit has two starting modes: Quick start-up

mode and Standard start-up mode. See “Setting the

standby mode” on page 92 for details.

Selecting the display language

English, French, German, Italian or

Spanish may be selected for the display

language.

SETUP









ENTER

Press SETUP.

The Setup menu appears.

Press





to select [Screen setting]

and press ENTER.

The display for selecting the language

appears.

Press





to select the desired

language from the [Language] setting

and press ENTER.

Display

Selectable language

English

Français

French

Deutsch

German

Italiano

Italian

Español

Spanish

Press









to select [Execute]

and press ENTER.

The display appears in the selected

language.

Note

When you change the display language, the input

language (page 15) also changes to the selected

language.

Tip

Refer to “List of input characters” (page 112) to find

out which characters you can use.

Summary of Contents for Giga Juke NAC-HD1E




















































































































Search results

Summary of Contents for Giga Juke NAC-HD1E

Reviews:

Related manuals for Giga Juke NAC-HD1E

Brands by name

Popular brands

Sony Giga Juke NAC-HD1E, Operating Instructions Manual

Search results

Summary of Contents for Giga Juke NAC-HD1E

Reviews:

Related manuals for Giga Juke NAC-HD1E

Brands by name

Popular brands