NAC-HD1E.GB.3-213-271-11(1)
10
GB
Outputs
Name of
jacks/
connectors
Jack/
connector
type
Output
level
Load
inpedance
ANALOG
OUT 1
ANALOG
OUT 2
Phono
jack
2 Vrms
(at 47 k
)
10 k
or more
PHONES
Stereo
standard
jack
15 mW
32
DIGITAL
COAXIAL
OUT
Phono
jack
0.5 Vp-p
75
DIGITAL
OPTICAL
OUT
Square
optical
connector
–18 dBm
(Wave
length:
660 nm)
MONITOR
OUT
Phono
jack
1.0 Vp-p
75
Other terminals/ports/jacks
Antenna terminals
FM: 75
unbalanced
AM: External antenna terminals
NETWORK port:
10BASE-T/100BASE-TX
USB connecting jack:
USB type A, Hi-Speed USB for connecting USB
devices such as “WALKMAN” (ATRAC AD)
Audio characteristics
Frequency response:
5 Hz - 20 kHz
Total harmonic distortion (HDD playback):
0.0035 % or less
Total harmonic distortion (analog recording/
playback):
0.0040 % or less
Signal-to-noise ratio (HDD playback):
103 dB or more
Signal-to-noise ratio (analog recording/playback):
98 dB or more
Dynamic range (HDD playback):
98 dB or more
Dynamic range (analog recording/playback):
95 dB or more
General
Power requirements:
230 V AC, 50/60 Hz
Power consumption:
48 W (0.5 W or lower at the standard start-up
mode)
Dimensions (w/h/d) (Approx.):
430 × 110 × 290 mm incl. projecting parts and
controls
Mass (Approx.):
7.2 kg
Operating temperature:
+5
C (+41
F) to +35
C (+95
F)
Operating humidity:
25 % to 80 %
Supplied accessories:
Audio connecting cord (1)
FM wire antenna (1)
AM loop antenna (1)
Remote control (1)
LR6 (size AA) batteries (2)
Operating Instructions (1)
Quick connection and operating guide (1)
U.S. and foreign patents licensed from Dolby
Laboratories.
Design and specifications are subject to change
without notice.
Standby power consumption : 0.5 W
Halogenated flame retardants are not
used in the certain printed wiring boards.
Halogenated flame retardants are not
used in cabinets.
