11
21
GB
Specifications
Additional Information
TV system:
I
Colour system:
PAL,
SECAM, NTSC 3.58, 4.43 (only Video In)
Channel Coverage:
I: UHF B21-B69
Picture Tube:
Flat Display FD Trinitron WIDE
•
KV-28LS35U: 28” (approx. 71 cm.
measured diagonally)
•
KV-32LS35U: 32” (approx. 82 cm.
measured diagonally)
Rear Terminals
:
1/
21-pin scart connector
(CENELEC
standard)
including
audio/video
input, RGB input, TV
audio/video output.
:
2/
q
21-pin Scart connector
(SMARTLINK)
(CENELEC standard) including audio / video input, S video input, selectable audio / video output and Smartlink interface.
audio outputs (Left/
Right) - phono jacks
Side Terminals
q
3
S
Video input – 4 pin DIN
…
3
video input – phono jack
3
audio input – phono jacks
headphones jack
Design and specifications are subject to change without notice.
Ecological Paper- Totally Chlorine Free
Sound Output:
2 x 14 W (music power)
2 x 7 W (RMS)
Woofer:
20 W (music power)
10 W (RMS)
Power Consumption:
KV-28LS35U: 90 W
KV-32LS35U: 88 W
Standby Power Consumption:
0.54 W
Dimensions (w x h x d) :
KV-28LS35U: Approx. 806 x 497 x 540 mm.
KV-32LS35U: Approx. 891 x 564 x 584 mm.
Weight:
KV-28LS35U: 43 Kg.
KV-32LS35U: 60.5 Kg.
Accessories supplied:
1 Remote Control (RM-932)
2 Batteries (IEC designated)
Other features:
•
Teletext, Fastext, TOPtext
•
Sleep Timer
•
Smartlink (direct link between your TV set
and a compatible VCR. For more
information on Smartlink, please refer to
the Instruction Manual of your VCR).
•
Dolby Virtual
•
Auto Format
22
Troubleshooting
Here are some simple solutions to the problems which may affect the picture and sound.
Additional Information
Problem
No picture (screen is dark) and no
sound.
Poor or no picture (screen is dark),
but good sound.
No picture or no menu information
from equipment connected to the
Scart connector.
Good picture, no sound.
No colour on colour programmes.
Distorted picture when changing
programmes or selecting teletext.
Picture slanted
Noisy picture when viewing a TV
channel.
No unscrambling or unstable picture
whilst viewing a scrambling channel
with a decoder connected through
the Scart connector
:
2/
q
.
Remote control does not function.
The standby indicator
on the TV
flashes.
Solution
•
Check the aerial connection.
• Plug the TV in and press the
button on the front of
the
TV.
•
If the standby indicator
is on, press
TV
button
on the remote control.
•
Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to the
factory
settings.
•
Check that the optional equipment is on and press the
button repeatedly on the remote control until the
correct input symbol is displayed on the screen.
• Press the
+/- button on the remote control.
• Check that “TV Speakers” is “On” on the “Sound
Adjustment” menu.
•
Check that headphones are not connected.
• Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to
factory settings.
• Turn off any equipment connected to the Scart
connector on the rear of the TV.
• Using the menu system, select the “Picture Rotation”
option in the “Detail Set Up” menu to correct the
picture
slant.
• Using the menu system, select the “Manual
Programme Preset” menu and adjust Fine Tuning
(AFT) to obtain better picture reception.
• Using the menu system, select the “Noise Reduction”
option in the “Detail Set Up” menu and select
“Auto” to reduce the noise in the picture.
• Using the menu system, select the “Set Up” menu.
Then enter to “Detail Set Up” option and set “AV2
Output” to “TV”.
• Check that the Media Selector on the remote control is
set according to the device you are using (VCR, TV or DVD).
• If the remote control does not operate the VCR or DVD
even when the Media Selector has been set correctly. Enter the necessary code set as explained on “Remote Control Configuration for VCR/DVD” chapter of this instruction manual.
• Replace the batteries.
• Contact your nearest Sony service centre.
If you continue to experience problems, have your TV serviced by qualified personnel.
Never open the casing yourself.
