10
18
Connecting Optional Equipment
Using the following instructions you can connect a wide range of optional equipment to
your TV set. (Connecting cables are not supplied).
To avoid picture distorsion, do not connect external equipment to connectors
A
and
B
at
the same time.
Connecting a VCR:
To connect a VCR, please refer to the section “Connecting the aerial and VCR” of this instruction
manual. We recommend you connect your VCR using a scart lead. If you do not have a scart
lead, tune in the VCR test signal to the TV programme number “0” by using the “Manual
Programme Preset” option. (for details of how to manually programme these presets, see page
13, step a).
Refer to your VCR instruction manual to find out how to find the output channel of your VCR.
Connecting a VCR that supports Smartlink:
Smartlink is a direct link between the TV set and the VCR. For more information on
Smartlink, please refer to the instruction manual of your VCR.
If you use a VCR that supports Smartlink, please connect the VCR by using a Scart lead to
the Scart
:
2/
q
F
.
B
1
2
“P
lay
S
tation”*
Deco
d
er
V
C
R
VCR
Deco
d
er
Hi-
fi
V
C
R
DVD
* “PlayStation”
is a product of Sony
Computer Entertainment, Inc.
*
“PlayStation
” is a trademark of Sony
Computer Entertainment, Inc.
V
C
R
DVD
C
8mm/Hi8/ DVC camcorder
A
S VHS/Hi8 DVC camcorder
D
F
E
When you connect the headphones,
the TV speakers will automatically
be muted.
Additional Information
continued...
19
GB
Connecting to external Audio Equipment:
Plug in your Hi-Fi equipment to the audio output sockets
E
if you wish to amplify the audio
output from TV. Next, using the menu system, select the “Sound Adjustment” menu. Enter the
“Detail Adjustment” option and set “TV Speakers” to “Off”.
The audio level of the external speakers can be modified by pressing the volume buttons
on the remote control. Also treble and bass settings can be modified through the “Sound
Adjustment” menu.
To enjoy “Dolby Virtual” sound effect through your
Hi-Fi equipment:
Place the speakers of your equipment in front of your
sitting place and besides the TV set but keep a distance of
50 cm from each speaker to the TV set.
Then by using the menu system, select the menu “Sound
Adjustment”. Next select “Detail Adjustment” and set
“Dolby Virtual” to “On”.
Using Optional Equipment
1
Connect your equipment to the designated TV socket, as indicated in the previous page.
2
Switch on the connected equipment.
3
To watch the picture of the connected equipment, press the
button repeatedly until the
correct input symbol appears on the screen.
Symbol
Input Signals
1
•
Audio / video input signal through the Scart connector
D
•
RGB input signal through the Scart connector
D
. This symbol appears only
if a RGB source has been connected.
2
•
Audio / video input signal through the Scart connector
F
.
2
•
S Video input signal through the Scart connector
F
.
3
•
Video input signal through the phono socket
B
and Audio input signal
through
C
.
3
•
S Video Input signal through the front S Video input jack
A
and Audio
signal through
C
.
4
Press
button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select
3 or
3
input signal using the instructions above. Finally, refer to the “Sound Adjustment” section of
this manual and select “Dual Sound”
“A” on the sound menu screen.
S
S
S
Additional Information
Your sitting position
Right Hi-Fi
Speaker
Left Hi-Fi
Speaker
~50°
