Sony ExwaveHAD DXC-C33P, Instructions For Use Manual, Page: 12 / 194

GB 12
Operation Through Menus
Operation Through
Menus
To change the settings on the menu, proceed
as follows.
Some of the settings, however, cannot be
adjusted on the menu. Use the controls on
the front of the camera control unit to adjust
them.
For details, see page 13.
Before starting menu operation, make sure
that the LOCK indicator on the front of the
camera control unit is not lit. When it is lit,
the menu will not be displayed even if you
press the
MENU button. If the LOCK
indicator lights, press the LOCK button to
turn the indicator off, then operate the menu.
1
Press the MENU button.
The MAIN menu appears.
2
Move the cursor to the menu item to
be set by pressing the
V
or
v
button,
then press the ENTER button.
The setting menu is displayed.
3
Move the cursor to the item to be
adjusted by pressing the
V or v button.
4
Change the value by pressing the
B
or
b button.
Holding down the button changes the
value quickly.
To reset to the initial set value
Select the item to be reset, then press the
B
and
b
buttons simultaneously.
For the initial set value on each item, see
“Menu Configuration” on page 46.
To return to the normal screen
Press the MENU button while the MAIN
menu is displayed.
While each setting menu is displayed, press
the
MENU button to return to the MAIN
menu, then press it again to return to the
normal screen.
Note
FREEZE
BARS
BLACK MENU
AE AREA
SELECT
ENTER LOCK
SCENE FILE
SELECT WHITE
1 4 2,3 2
LOCK button
and indicator
<MAIN>
>EXPOSURE
CONTRAST
WHITE BALANCE
ENHANCER
GENERAL
SYSTEM
SCENE FILE [A]
Exit Select
MENU
Next
ENTER
<EXPOSURE>
>GAIN
STEP
SHUTTER
[A]
STEP
0dB
OFF
Back Select
MENU
<EXPOSURE>
GAIN
STEP
>SHUTTER
[A]
STEP
0dB
OFF
Back Select
MENU
<EXPOSURE>
GAIN
STEP
>SHUTTER
SPEED
[A]
STEP
0dB
STEP
OFF
Back Select
MENU