Sony DXF-801, Operation Manual

Page: 16 / 71

16 Location and Function of Parts
Location and Function of Parts
a
Eyepiece focusing knob
Turn this to adjust the viewfinder focus to
match your eyesight.
(See page 19.)
b
Stopper
Lift up when detaching the viewfinder from
the camera/camcorder.
(See page 18.)
c
LIGHT switch and light
The light illuminates the lens, and the
switch controls the light as follows.
HIGH/LOW: Turn the light on and control
the brightness.
OFF: Turns the light off.
d
TAKE/TALLY indicator (orange)
This functions as a green tally lamp when a
camera control unit is connected with the
camera/camcorder.
With the DSR-400/450WS, this indicator
flashes when the camcorder is set to
Interval Rec mode. During recording in
Interval Rec mode, it flashes at high-speed.
e BATT (battery) indicator (red)
This lights when the battery capacity is low.
f
REC/TALLY (recording/tally)
indicators (red)
• This flashes from the time when you
press the VTR button on the lens or
camera/camcorder until recording starts,
then stays lit during recording.
• When using a camera control unit, this
lights when the video from the camera/
camcorder to which the viewfinder is
attached is selected.
• This indicates a fault of the camera/
camcorder.
For details, see the operating instructions for the
camera/camcorder.
SHUTTER GAIN UP
TAKE BATT REC
TALLY
HIGH LOW OFF
LIGHT
4
5
6
7
8
3
1
2
9
0
qa
qs
qd
qf
qg
qh
Eyecup