Sony DXC-D35 Operating Instructions Manual Download Page 74

Page: 74 / 108

Chapter 4

Viewfinder Screen Indications and Menus

Chapter 4 Viewfinder Screen Indications and Menus

Access advanced menu page 13.

a) An asterisk (*) appears in front of any factory

preset file whose contents have been revised
at least once.

Move the cursor to DESTINATION FILE and
repeatedly press the UP/ON button or the DOWN/
OFF button to select USER1, USER2, or USER3.

Press the UP/ON button to move the cursor to
STORE FILE?.

The display changes as shown below.

Press the UP/ON button to store the file. To abort
the save operation, press the DOWN/OFF button
(the display returns to the one shown at step

When the save operation is finished, the display
changes as shown below.

To save setup files to a tape (when using
the DSR-1/1P)

Connect the DSR-1/1P to the camera head and load the
tape onto which the file will be recorded.

Perform steps

of “Saving File Settings” and

select TAPE as the file saving destination.

Press the UP/ON button to move the cursor to
STORE FILE?.

The display changes as shown below.

Currently
selected file

File in which
current settings
are to be stored

Setup Files

Summary of Contents for DXC-D35













































































































Search results

Summary of Contents for DXC-D35

Reviews:

Related manuals for DXC-D35

Brands by name

Popular brands

Sony DXC-D35, Operating Instructions Manual

Search results

Summary of Contents for DXC-D35

Reviews:

Related manuals for DXC-D35

Brands by name

Popular brands