69
TITLE SET ?
TITLE SET ?
To replace a character
Return the cursor to the position of the character you
want to replace, select the desired character with the
UP/ON button, and press the DOWN/OFF button. The
characters must be changed one by one as described in
the above procedure.
To move the cursor to the right
Press the DOWN/OFF button repeatedly.
To move the cursor to the left
While pressing the UP/ON button, press the DOWN/
OFF button repeatedly.
To change the position of the title characters
Press the DOWN/OFF button
If you are using a VO-8800/8800P portable VTR, do
not use the upper character display area because the
VTR tape remaining time shows here. Use only the
lower character display area.
To exit character setting mode
Press the DISP CHG switch.
The next time you use the camera
When you turn on the camera, the memorized
characters are displayed on the viewfinder screen at
step 1 of “Preparation” (see page 67). To display the
characters on the monitor screen and output them to
the VTR, press the UP/ON button.
Press the DOWN/
OFF button.
Press the DOWN/
OFF button.
