59
A. IRIS
DETAIL
M. PED
SHUTTER
:
:
:
: 1/100
2
1
3
Selecting the Shutter Speed
The shutter speed is factory set to 1/100 for NTSC and
1/60 for PAL. You can change the shutter speed if
necessary. Select the shutter speed from the
following:
For NTSC: 1/100, 1/250, 1/500, 1/1000, 1/2000
For PAL: 1/60
1)
, 1/250, 1/500, 1/1000, 1/2000.
Your selection is retained in the memory of the
camera.
UP/ON button,
DOWN/OFF button
DISP CHG switch
SHUTTER switch
1
To change the shutter speed, set the SHUTTER
switch on the camera to ON.
2
Press the DISP CHG switch several times until the
display above appears on the display screen.
If the SHUTTER switch is set to OFF, “OFF”
appears at the current setting value.
3
Select the shutter speed.
To increase the shutter speed value: Press the
UP/ON button on the camera head.
To decrease the value: Press the DOWN/OFF
button on the camera head.
To reset the value to 1/100 (for NTSC) or 1/60
(for PAL): Press the UP/ON and DOWN/OFF
buttons simultaneously.
1) When you are using the RM-M7G to control the camera,
the 1/100 setting on the RM-M7G sets the camera shutter
speed to 1/60 and “1/60” appears on the screen display in
the viewfinder. This is to prevent flickering when you are
shooting a CRT screen.
Flashes
Current setting
value
Shutter speed
.........................................................................................................................................................................................................................
