53
A. IRIS
DETAIL
M. PED
SHUTTER
: NORM
:
:
:
1
2
Selecting the automatic iris reference level
When adjusting the video level of a back-lit subject,
you can change the automatic iris reference level
setting. When you make the setting, it is retained in
the memory of the camera.
The selectable values are as follows:
• –1.0
• –0.5
• NORMAL (reference value)
• 0.5
• 1.0
DISP CHG switch
UP/ON button,
DOWN/OFF button
Current setting value
Flashes
1
To select the automatic iris reference level, press
the DISP CHG switch several times until the above
display appears on the viewfinder screen.
2
Select the setting value (from –1.0 to 1.0).
To raise the value: Press the UP/ON button
To lower the value: Press the DOWN/OFF button
To reset to NORMAL: Press the UP/ON and
DOWN/OFF buttons simultaneously
Note
When you connect the CCU-M7/M7P, CCU-M5/M5P
Camera Control Unit, or RM-M7G Camera Remote
Control Unit to the camera, change the automatic iris
reference level using the controls on the CCU-M7/
M7P, CCU-M5/M5P, or RM-M7G. The controls on
the camera do not operate this function.
Reference level of
the automatic iris
