l
CENTER
Settings for the Speakers
NONE
(SPEAKER SETUP)
To obtain the best possible surround sound,
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume and the balance of the
speakers to the same level.
This setting is effective when connecting the
speaker with 5.1 CH OUTPUT jacks (page
.
Select “SPEAKER SETUP” in the Setup
Display. To use the display, see “Using the
Setup Display” (page 73).
The default settings are underlined.
To return to the default setting
Select the item, then press CLEAR. Note that
only the “SIZE” setting does not return to the
default setting.
SIZE
Selects the size of the speakers.
l
FRONT
LARGE
SMALL
Normally select this position.
Select this when the sound
distorts or the surround effects
are difficult to hear.
LARGE
SMALL
l
REAR
NONE
LARGE
SMALL
Select this if you do not connect
a center speaker.
Normally select this position.
Select this when the sound
distorts or the surround effects
are difficult to hear.
Select this if you do not connect
rear speakers.
(REAR/SIDE): Normally select
this position. Select according
to the rear speaker position*.
(REAR/SIDE): Select this
when the sound distorts or the
surround effects are difficult to
hear.
Select according to the rear
speaker position*.
Rear speaker position
Correctly specify the location of the rear speakers to
enjoy the surround effect.
l
Set to “SIDE,” if the location of the rear speakers
corresponds to section
below.
l
Set to “REAR,” if the location of the rear speakers
corresponds to section
below.
This setting affects only “VIRTUAL REAR
SHIFT,” “VIRTUAL MULTI REAR,” and
“VIRTUAL MULTI DIMENSION” mode (page
57). This setting does not affect the Super Audio
CD Multi audio signals.
