Sony DVP-F25, Service Manual

Page: 9 / 92

1-5
20
Notes
• Connect the player directly to the TV. If you pass the player signals via the VCR, etc., you may not receive
a clear image on the TV screen.
• For Asian models only
You can switch the player’s colour system to match the colour system of the connected TV (page 15).
When you play a disc recorded in the NTSC colour system, the player outputs the video
signal or the Setup Display etc. in the NTSC colour system and the picture may not appear
on the PAL colour system televisions. In this case, remove the disc.
VCR
CD/DVD player
TV
Connect
directly
21
H
ook
up
s
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections, through .
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Components to be connected Connection Your setup
TV
• Surround effects: TVS DYNAMIC (page 50),
TVS WIDE (page 50)
(page 22) Example
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 50)
or
MD deck/DAT deck
• Surround effects: none
(page 23) Example
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 67)
(page 24) Example
AV amplifier (receiver) with a digital input jack
having a Dolby Digital, MPEG audio, or DTS**
decoder and 6 speakers
• Surround effects: Dolby Digital (5.1ch) (page 67),
DTS (5.1ch) (page 68), MPEG audio (5.1ch)
(page 68)
(page 25) Example
A D
A
B
C
D
c
continued
22
Connecting to your TV
This connection will use your TV speakers for sound.
* The yellow plug is used for video signals (page
18).
z
Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
AUDIO OUT L/R jacks to the TV’s audio input
jack.
A
TV
l
: Signal flow
CD/DVD player
(white)
(red)
Audio/video
cord (supplied)
to audio input
(yellow)*
(white)
(red)
to AUDIO
OUT L/R
EURO AV adaptor (supplied with some
models) to connect to the SCART (EURO
AV) input jack
(red)(white)
(yellow)*
23
H
ook
up
s
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use . If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use .
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
z
Hint
In connection , you can use the supplied
audio/video cord instead of using a separate audio
cord.
Note
If you select one of the TVS effects (page 49) while
playing a disc, no sound will come from your
speakers with the
connection.
B
B-1
B-2
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red)
(white)
Optical digital cord
(not supplied)
Stereo audio
cord (not
supplied)
to audio input to optical digital input
to AUDIO OUT L/R
to DIGITAL OUT
(OPTICAL)
l
: Signal flow
(red) (white)
B-1
B-2
c
continued