Sony DTV-01, Manual

Page: 16 / 132

19
Model KW-34HD1 - Normal Operation
These are normal operating conditions for Sony’s first high Definition TV during power on/off and input selection conditions.
When this TV is ON there is no static electricity felt at the CRT screen.
It is normal to have black left & right borders on both sides of the picture when viewing a 4:3 aspect ratio picture on a 16x9 aspect ratio TV picture tube.
Power ON
Operation Initial Step Sounds Visual Conditions
Plug in AC connection Nothing Nothing Front panel Master power button off
Power ON
A Master power ON
button pressed 1. 2 Relays click immediately
2. Degaussing coil energized
(humming sound)
3. TV audio 1 sec after relays click
1. Front panel Standby light:
2. Blinking after relay click
3. Stops blinking in about 7 seconds when the picture
appears.
4. OSD: Yellow characters “Please check DTV
receiver connections”
AC connected.
Set formerly OFF (by remote).
1.3 Amps @120Vac
Power ON
B Power ON in
remote pressed 1. 2 Relays click immediately
2. Degaussing coil energized
(humming sound)
3. TV audio 1 sec after relays click
1. Front panel Standby light:
2. Standby light starts blinking after relay click
3. Stops blinking in 7 seconds when the picture
appears.
4. OSD reads in Yellow characters “Please check
DTV receiver connections”.
AC connected.
Master power button ON
Standby light ON
TV OFF
1.3 Amps @120Vac
TV OFF
A Master Power
OFF pressed 2 relays clicks
TV sound mutes Picture goes dark
All lights out
TV OFF
B Remote power
OFF pressed 2 relays clicks
TV sound mutes Picture goes dark
Standby light comes ON
TV Operation with NO Inputs connected
Selection Access Step Sounds Visual Conditions
Video input Press TV/Video button
until video 1, 2, or 3
appear on the screen No sound when there is
no video input. Video 1, 2, or 3 appears in green letters at the upper left corner of the screen.
Screen is dark with no video input. Power ON
No inputs
DVD, HD, input or
High Definition TV input
from external box Press TV/Video button
until DVD or HD input
is selected. No sound when there is
no input. DVD or HD appears in green letters at the upper left corner of the screen.
Screen is dark with no input. Power ON
No inputs
VHF / UHF input Press the TV button on
the remote Off the air white noise
from the unconnected
VHF/UHF input. OSD station number appears in green at the upper right corner of the screen
with snow. TV channels can be entered by remote or the up/down buttons
will work if stations were programmed during set up. Power ON
No inputs
Cable Input Press the TV button on
the remote Off the air white noise
from the unconnected
cable input. OSD “C _” appears in green at the upper right corner of the screen with
snow. Cable channels can be entered by remote or the up/down buttons will
work if cable stations were programmed during set up. Power ON
No inputs