Sony DSX-A55BT, Operating Instructions Manual

Page: 10 / 88

10
GB
Connecting Other Portable
Audio Device
1
Turn off the portable audio device.
2
Turn down the volume on the unit.
3
Connect the portable audio device
to the AUX input jack (stereo mini
jack) on the unit with a connecting
cord (not supplied)
* .
* Be sure to use a straight type plug.
4
Press SOURCE to select [AUX].
To match the volume level of the
connected device to other sources
Start playback of the portable audio device
at a moderate volume, and set your usual
listening volume on the unit.
Press SELECT, and rotate the control dial to
select [AUX VOL] (page 18).
Listening to the Radio
To listen to the radio, press SOURCE to select
[TUNER].
1
Press MODE to change the band.
2
Press and hold SELECT (FM1, FM2,
FM3, MW, SW1 or SW2).
The setup display appears.
3
Rotate the control dial to select
[BTM], then press it.
The unit stores stations in order of
frequency on the number buttons.
1
Press MODE to change the band
(FM1, FM2, FM3, MW, SW1 or SW2).
2
Perform tuning.
To tune manually
Press and hold SEEK +/– to locate the
approximate frequency, then press SEEK
+/– repeatedly to fine adjust to the
desired frequency.
To tune automatically
Press SEEK +/–.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Listening to the Radio
Storing automatically (BTM)
Tuning