Sony DSR-PD175P/PD177P Page 9 Operating Manual Download

Page: 9 / 128

Ge
tt

rte

Step 2: Attaching the lens hood with lens cover

Align the marks on the lens hood to
those on the camcorder, and turn the
lens hood in the direction of the
arrow

To remove the lens hood with lens
cover

Turn the lens hood in the opposite direction
to the arrow

in the illustration while

pressing the PUSH (lens hood release)
button.

Tips

• If you attach or remove a 72mm (2 7/8 in.) PL

filter or MC protector, remove the lens hood
with lens cover.

To open or close the shutter of the
lens hood with lens cover

Move the lens cover lever to OPEN to open
the lens cover, and move the lever to
CLOSE to close the lens cover.

PUSH (lens hood release) button

Lens cover lever

Summary of Contents for DSR-PD175P/PD177P

































































































































Search results

Summary of Contents for DSR-PD175P/PD177P

Reviews:

Related manuals for DSR-PD175P/PD177P

Brands by name

Popular brands

Sony DSR-PD175P/PD177P, Operating Manual

Search results

Summary of Contents for DSR-PD175P/PD177P

Reviews:

Related manuals for DSR-PD175P/PD177P

Brands by name

Popular brands