Chapter 4
Editing
Chapter 4
Editing
67
Chapter
4
Editing
Automatic Editing
This section describes how to carry out automatic editing with this unit and
another VCR connected to the REMOTE-IN or REMOTE-OUT connector.
Overview of Automatic Editing
With this unit, you can use the following two edit modes.
• Assemble edit mode
• Insert edit mode
(In this Operating Instructions, these two modes are also referred to simply
as assemble mode and insert mode, respectively.)
Assemble edit mode
In assemble editing, you record video and audio materials in order from
the start of the tape. In addition to video and audio, time code is also
recorded. This edit mode is convenient when you are recording on a new
tape.
Note
Before you begin assemble editing for the first time with a new tape, a
video signal, e.g. a black signal, and time code must be recorded on the
tape in advance of the recorder IN point for a length equal to or greater
than the preroll time.
