Chapter 6
Setup Menu
Chapter 6
Setup Menu
119
Item number
Item name
Settings
605
TCG REGEN
MODE
Select the signal to be regenerated when the time code generator is in the regeneration
mode (i.e., when the PRESET/REGEN switch on the subsidiary control panel is set to
REGEN, or the unit is in automatic edit mode).
TC&UB : Both the time code and user bits are regenerated.
TC: Only the time code is regenerated.
UB: Only the user bits are regenerated.
Menu items in the 600s, relating to the time code generator
607
U-BIT BINARY
GROUP FLAG
610
REGEN
CONTROL MODE
When editing with two DSR-2000/2000P units, if you use the control panel for editing
operation, select whether or not the time code is automatically regenerated.
AS&IN : In editing with this unit as the recorder, regardless of the setting of the INT/
EXT–PRESET/REGEN switch, in assemble and insert editing, the time code
generator regenerates according to the time code on the tape.
ASSEM: In editing with this unit as the recorder, regardless of the setting of the INT/
EXT–PRESET/REGEN switch, in assemble editing only, the time code generator
regenerates according to the time code on the tape.
MANU: Regardless of whether this unit is the recorder or player, the time code
generator operates in accordance with the PRESET/REGEN setting of the INT/EXT–
PRESET/REGEN switch.
FULL: Regardless of the REMOTE button setting, when any of the ASSEMBLE,
VIDEO, CH-1 to CH-4 and TC buttons is lit, the time code generator regenerates
according to the time code played back from the tape.
611
TC OUTPUT
PHASE IN EE
MODE
Select the time code output mode for output from the TIME CODE OUT connector in E-
E mode.
MUTE : Mute the output.
THRU: Output the time code input to the TIME CODE IN connector as it is.
V-IN: Output the time code with the same phase as the input video signal phase.
V-OUT: Output the time code with the same phase as the output video signal phase.
612
TC OUTPUT
MUTE IN
SEARCH MODE
Select whether to mute the output from the TIME CODE OUT connector in search (jog/
shuttle) mode.
ON : Mute.
OFF: Do not mute.
Select the user bits to be used in the time code generated by the time code generator.
000 : Character set not specified.
001: 8-bit characters compliant with ISO 646 and ISO 2022.
010: Undefined.
011: Undefined.
100: Undefined.
101: SMPTE 262M page/line multiplex system.
110: Undefined.
111: Undefined.
613
VITC OUTPUT
Select the time code to be output as VITC.
OFF: Do not output VITC.
TC: Output TC after converting it into VITC.
VITC : Output VITC.
