Sony DSR-1800A, Operating Instructions Manual

Page: 79 / 112

79
Changing Menu Settings
C
h
ap
te
r 4
M
e
nu
S
e
tti
n
gs
3
Follow the same procedure as in steps
3
to
8
of the
procedure in the section “Changing the Settings of
Basic Items” on page 76 using the arrow buttons to
select an item and change its setting.
4
When you have completed the settings, press the SET
(YES) button.
The message “NOW SAVING...” appears on the
monitor screen, and “Saving...” appears in the time
counter display, while the new settings are saved in
memory.
When the saving operation is completed, the monitor
screen and time counter display return to their normal
indications.
Returning Menu Settings to Their
Factory Default Settings
After making menu setting changes, to return settings to
their factory default settings (setting initialization), use the
following procedure.
To return a particular setting to its factory
default setting
In the display for changing the target setting, press the
RESET (NO) button.
Carry out the procedure in the section
“Changing the
Settings of Basic Items” on page 76 up to step
6
, then with
the current setting displayed (in the example, if the setting
has been changed it will be “100%” or “50%”), press the
RESET (NO) button. The setting returns to its factory
default setting of “75%.”
To return all settings to their factory
default settings
Use the following procedure.
1
Press the MENU button on the menu control panel to
display the menu selection.
2
Press the k button to display level 1 of the setup
menu.
3
Press the RESET (NO) button.
A message appears, to confirm whether or not you
wish to return all settings to their factory default
settings.
4
Press the SET (YES) button.
The message “NOW SAVING...” appears on the
monitor screen, and “Saving...” appears in the time
counter display, while the settings of all items are
returned to their factory default settings. These factory
default settings are saved in memory.
Note
If you power off the unit while settings are being
saved, settings may not be correctly returned to their
factory default settings. Wait until the saving is
completed before powering off the unit.
To abandon the resetting operation
Instead of pressing the SET (YES) button, press the
RESET (NO) button. The display returns to menu
level 1, leaving the settings unchanged.
Monitor screen
message
“INITIALIZE ALL ITEMS TO
FACTORY PRESET VALUES?”
Message in the time
counter display “Init setup?”