116
Troubleshooting
Cannot shoot in Smile Shutter mode.
•
Press the shutter button all the way down.
•
No image is shot unless a smile is detected (page 31).
•
[Smile demo mode] is set to [On]. Set [Smile demo mode] to [Off] (page 80).
This subject is not visible on the screen.
•
The camera is set to the playback mode. Press the
(Playback) button to change to the
recording mode (page 33).
Anti-blur function does not work.
•
The anti-blur function does not work when
appears on the display.
•
The anti-blur function may not work properly when shooting night scenes.
•
Shoot after pressing the shutter button halfway down; do not press it fully down suddenly.
•
Confirm that the [Conversion Lens] setting is correct (page 85).
Recording takes a long time.
•
The NR slow shutter function is activated (page 18). This is not a malfunction.
•
[DRO] is set to [DRO plus] (page 59). This is not a malfunction.
The image is out of focus.
•
The subject is too close. Make sure to position the lens farther away from the subject than the
shortest shooting distance, approximately 10 cm (4 inches) (W)/50 cm (1 foot 7 3/4 inches)
(T) (from the front of the lens), when shooting (page 26).
•
(Twilight) mode,
(Landscape) mode or
(Fireworks) mode is selected in the Scene
Selection mode when shooting still images.
•
The Semi manual function is selected. Select the auto focus mode (page 55).
•
Confirm that the [Conversion Lens] setting is correct (page 85).
•
Refer to “If the subject is out of focus” on page 56.
Zoom does not work.
•
You cannot use the Smart zoom depending on the image size (page 84).
•
You cannot use the Digital Zoom when shooting movies.
•
You cannot change the zoom scale when:
–
The Smile Shutter is in standby (page 31).
–
Shooting movies.
•
Confirm that the [Conversion Lens] setting is correct (page 85).