If you fire the flash before the flash unit pops up entirely, it may cause
malfunction.
You cannot use the flash when recording movies.
While charging the flash,
flashes. After charging is completed, the flashing
icon will light up.
When shooting with the flash and the zoom is set to W, the shadow of the lens
may appear on the screen, depending on the shooting conditions. If this
happens, shoot away from the subject or set the zoom to T and shoot with the
flash again.
When the monitor is tilted upward more than 90 degrees, it is difficult to operate
the
(Flash pop-up) switch. Raise the flash unit before adjusting the monitor
angle.
When using flash to shoot pictures of yourself, be careful not to look directly at
the light, because the flash will go off at a close distance. To prevent the flash
from hitting the monitor when you press it back down into the camera body after
use, first return the monitor to its original position.
[47] How to Use
Using shooting functions
Using the flash
Notes on using the flash
When using the flash, note the following points.
You cannot use the flash when recording movies.
While charging the flash, the
indicator flashes. When the charging of the
flash is finished, the indicator lights up.
[48] How to Use
Using shooting functions
Using the flash
Flash Mode
You can set the flash mode.
1. MENU
→
(Camera Settings)
→
[Flash Mode]
→
desired setting.
