(WPS) button.
1. MENU
→
(Wireless)
→
[WPS Push].
2. Press the WPS button on the access point you want to register.
Note
[WPS Push] works only if the security setting of your access point is set to WPA
or WPA2 and your access point supports the Wi-Fi Protected Setup (WPS)
button method. If the security setting is set to WEP or your access point does
not support the Wi-Fi Protected Setup (WPS) button method, perform [Access
Point Set.].
For details about the available functions and settings of your access point, see
the access point operating instructions or contact the administrator of the
access point.
A connection may not be enabled depending on the surrounding conditions,
such as the type of wall material or if there is an obstruction or poor wireless
signal between the product and access point. If that happens, change the
location of the product or move the product closer to the access point.
[235] How to Use
Using Wi-Fi functions
Changing the settings of Wi-Fi functions
Access Point Set.
You can register your access point manually. Before starting the procedure, check
the SSID name of the access point, security system, and password. The password
may be preset in some devices. For details, see the access point operating
instructions, or consult the access point administrator.
1. MENU
→
(Wireless)
→
[Access Point Set.].
2. Select the access point you want to register.
