manualshive.com logo in svg

Sony DPS-V55, Manual

Share
Download
Sony DPS-V55 Manual Download Page 36

36

2 Channel Effects

33

Auto Wah (Wah)

The auto wah effect changes according
to the level of the input signal (auto
wah).

z

The 

Sens

 parameter lets you switch the

polarity of the wah effect.

Parameters

No.

Name

Range

Comments

–

FxA(B) On/Off

On, Off

Turns the effect on or off.

1

Sens

–100 ~ 100

Determines the depth of the wah. Negative (–) values shift the sound from “wah”
(open) to “ooo” (closed) as the level of the input signal increases. Positive (+) values
shift the sound from “ooo” to “wah” as the level of the input signal increases.

2

Attack

0 ~ 50

Determines how long it will take to activate the effect when a signal is input. Larger
values take longer for the effect to activate.

3

Release

0 ~ 50

Sets the time required for the effect to completely disappear when the input signal
decreases. Larger take longer for the effect to disappear.

4

Mode

Narrow, Normal, Wide, Low Choose “Narrow” for light wah, “Wide” for a deep wah, or “Low” for low band wah.

Summary of Contents for DPS-V55





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands