Chapter 6
Shot Mark Function
6-4
Chapter 6
Shot Mark Function
To write in crash recording or assemble
editing
At the position you wish to write the mark, hold down
the ENTRY button, and press the MARK button.
While the mark is being written, the message
“RECORD SHOT MARK” appears on the monitor.
Writing during playback, while stopped, or
during a search
When this unit is in any of the playback, stopped, or
search modes, you can write a post mark only.
1
Hold the MARK button down for at least 2
seconds.
The REC/ERASE indicator lights green.
2
At the position you wish to write the mark, hold
down the ENTRY button and press the MARK
button.
While the mark is being written, the message
“RECORD SHOT MARK” appears on the
monitor, and the REC/ERASE indicator lights red.
Erasing a shot mark
Select the shot mark from the shot mark list, and then
carry out the deletion operation.
For details of the procedure, see page 6-6.
6-3-3 Shot Mark List Operations
Displaying the shot mark list
Hold down the ENTRY button and press the LIST
button.
All of the shot mark types for which item G02 in the
shot mark operation menu is set to “ON” appear in the
list. If you do the same operation again, the list display
disappears.
Example of list display
The following figure shows how the list is organized.
9
)
0
6
p
%
REC/ERASE indicator
ENTRY button
MARK button
9
)
0
6
p
%
ENTRY button
LIST button
Shot mark number of current cursor
position / total number of stored shot
marks
(011/180)
NO. TIME CODE
SHOT MARKER
*011 S1 10:04:05:11
013 V 10:07:05:02
012 R 10:05:35:24
----------------------------
----------------------------
014 R 10:08:35:04
015 S2 10:09:05:11
016 R 10:10:35:24
017 #R 10:10:36:00
Separator
between read-in
groups of shot
marks
Cursor (current
shot mark position)
Position in list
Shot mark type
R: recording start mark
S1: shot mark 1
S2: shot mark 2
V: virtual shot mark
P: post mark
#: memo mark
Timecode
6-3 Shot Mark Operations
