1-7
Confidential
DMP-1000P (AEP)
30
GB
Making Various Prints
Making a mirror image print
You can make a mirror image or upside-down mirror
image when you print a picture from video equipment.
You can use this feature with the standard printing
(page 20 to 22) and split printing (page 26 to 27).
Before you begin
1
Turn on the printer and television and set the input
selector of the television to “VIDEO.”
2
Set INPUT SELECT to “VIDEO MOTION” or
“VIDEO STILL.”
1
Set MIRROR IMAGE SELECT to the desired type of
image reversal.
2
Start playback on the video equipment.
While the INPUT indicator lights up, the playback
picture appears on the screen (input picture).
3
Press CAPTURE when the picture you want to
print appears on the screen.
The selected picture appears. When you set
MIRROR IMAGE SELECT to “V” or “H,” “R”
(reversed) mark appears on the lower right of the
screen.
: Indicates an upside-down
mirror image.
: Indicates a mirror image.
Note
You cannot make a mirror
image print when you
want to print the image in
the floppy disk.
No reversal
(original image)
Horizontally
reversed
(mirror image)
Vertically reversed
(upside-down image)
31
GB
Making Various Prints
Making Various Prints
4
Press PRINT.
The mirror image is printed.
Making a mirror image print in the split
printing mode
Set MIRROR IMAGE SELECT to the desired type
before performing the printing procedures in the
“Printing images from the video equipment” (page 26).
When you use different images
You can change the mirror image type for each split
plane.
Example
• Plane 1 and 3: vertically reversed
• Plane 2 and 4: horizontally reversed
To change the mirror image type for each split plane,
change the MIRROR IMAGE SELECT setting each time
before you press CAPTURE.
When you use the same image
The same mirror image in the split planes is printed.
Vertically
reversed
Horizontally
reversed
32
GB
Making Various Prints
Making a label for a floppy disk
You can make a label for a floppy disk by using the
sticker-type print paper.
The selected image is printed as large picture on one
label, and 3 thumbnail images with lines are printed on
the other label. The total number of images is printed
at the bottom left of the label.
Before you begin
1
Turn on the printer and television and set the input
selector of the television to “VIDEO.”
2
Set INPUT SELECT to “FD.”
1
Select “
(FD label print)” using the print mode
dial.
2
Select the image for printing.
1
Insert the floppy disk into the floppy disk slot.
2
Press the arrow buttons to move the white
frame to the image you want to print, then
press ENTER.
The selected image is placed on the upper half
of the print and the leftmost of the thumbnail
on the lower half.
FD label print
When printing the input
image from the video
equipment
You cannot make a label
for a floppy disk.
Printing the date
You can print the date
when the image was
saved by setting DATE to
“ON.”
33
GB
Making Various Prints
Making Various Prints
3
Repeat step
2
to select images for the other 2
thumbnails.
4
Press CAPTURE if you want to check the
actual print image.
To display multiple print images, press
V
or
v
.
3
Insert the sticker type paper into the printer, then
press PRINT.
The print indicator flashes while printing, and the
label for the floppy disk is printed.
You can use each part of the label for the floppy
disk. Cut the paper so it fits the label side.
Cancelling the selection
Move the white frame to
the image you want to
cancel the selection and
press ENTER. The blue
frame disappears and the
selection is canceled.
To remove the all selected
images, press CLEAR
ALL.
Perform printing
procedures from the
beginning.
Note
You cannot type on the
printing surface before
printing. If you want to
write greetings or draw
on the printing surface
after printing, use an oil
ink pen.
The second and
third selected
images
The first
selected image
Date (when set
to print)
Total images