7-3
Tele-File Menu
7-10
Chapter 7
Tele-File
Chapter 7
Tele-File
To make comment settings
Proceed as follows to make comment settings.
1
Select a clip.
2
Select comment.
3
Press the F2 (SELECT) button.
The unit enters clip data modification mode.
4
Press the F2 (MODIFY) button.
The data entry area begins to flash, and the data
can be set.
5
Enter a character by rotating the MULTI
CONTROL knob.
6
Press F4 (
t
) button to move to the next character
place.
7
Repeat steps
5
and
6
until you have entered the
entire comment.
To delete characters
Press the F3 (
T
) or F4 (
t
) button until the
character that you want to delete starts flashing,
and then press the F5 (DELETE) button.
To insert characters
Press the F3 (
T
) or F4 (
t
) button until the
character place after the place where you want to
insert starts flashing, and then press the F6
(INSERT) button.
8
Press the F2 (OK) button.
The comment is confirmed and the unit returns to
clip data display mode.
7-3-4 Undo/Resume Functions
Undo function
The undo function cancels all modifications and
returns the data to the state it was in when first read.
Press the F5 (UNDO) button in clip data display mode.
A confirmation message appears. Press the F2 (OK)
button to execute the undo and cancel all modifications
to the data.
Resume function
If you have not modified any data since the last
execution of the undo function, you can press the F5
(UNDO) button again. The button functions as a
resume button, which cancels the immediately
preceding undo.
Press the F5 (UNDO) button in clip data display mode.
A confirmation message appears. Press the F2 (OK)
button to execute the resume and cancel the
immediately preceding undo.
