Chapter 12
Setup Menus
Chapter 12
Setup Menus
12-13
Menu items in the range 300 to 399, relating to editing operations (Continued)
Item number
308
309
310
311
312
313
314
315
Item name
SELECTION OF STD/
NON-STD FOR
COMPOSITE VIDEO IN
SERVO/AV REFERENCE
SEL
REC INHIBIT
ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH1
ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH2
ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH3
ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH4
ANALOG AUDIO EDIT
RESET REPLACE FOR
CUE
Settings
Select the STD or NON-STD mode in accordance with a composite video input.
AUTO : Detect automatically whether the input video luminance and chrominance
signals are interleaved or not. If they are interleaved, select the STD mode. If
they are not interleaved, select the NON-STD mode.
STD: The STD mode is always used (forced STD mode).
N-STD: Use this setting when color framing of the input video signal is unstable
(forced NON-STD mode).
Select the servo reference signal.
AUTO1 : During recording, an analog component/composite or digital input video
signal is used as the servo reference signal. During playback, the signal
selected by the function menu item OUTREF is used as the servo reference
signal. If the signal selected by the OUTREF setting is not connected, an
internal reference signal is used.
AUTO2: When the function menu item OUTREF is set to REF, and any of the
ASSEMBLE, VIDEO, AUDIO CH1 to CH8 and TC buttons is lit, the reference
signal for video/audio signal processing is locked to the input video signal.
EXT: The servo reference signal is forced to be “EXT” (an external reference
video input signal is used).
Select the conditions under which recording is inhibited when the function menu
item RECINH is set to ON.
ALL : All tape recording is inhibited.
CRASH: Normal tape recording is inhibited. Select this setting when you wish to
carry out assemble editing.
VIDEO: Inhibit recording of video and CTL signals.
AUDIO: Inhibit recording of audio and CTL signals.
Note
When the function menu item RECINH is set to ON, the REC INHI indicator on
the lower control panel lights. If an operation inhibited by this item is attempted,
the REC INHI indicator flashes.
When using an editor (PVE-500, BVE-600, etc.) or a remote controller which
cannot control digital audio edit preset, select how to activate edit preset of each
digital audio channel (channels 1 to 4) on this unit using the analog audio edit
preset function of the editor or remote controller.
Set edit preset of each digital audio channel of this unit on or off according to the
analog audio preset specified by the remote controller or editor.
NODEF: No definition.
CH1: Follow edit preset of analog channel 1.
CH2: Follow edit preset of analog channel 2.
CH1+2: Follow edit preset of analog channel 1 or 2.
The default settings for each item are as follows:
311: CH1
312: CH2
313: NODEF
314: NODEF
315: NODEF
(Continued)
