Sony DHR-1000 Operating Instructions Manual Download Page 72

Page: 72 / 112

Editing

Press START / PAUSE.

The whole screen appears and assemble
editing starts.
When editing ends, this VCR is set to
recording pause and the screen in step

reappears.

To assemble edit more than 10 events

Press ASSEMBLE.
The assemble editing mode is canceled, and the IN/OUT points
stored in memory are erased.

Repeat steps

To stop assemble editing

To stop while editing, press START/PAUSE.
This VCR is set to recording pause, and you can check the events or
change the recording starting point.
When you press START/PAUSE again, editing restarts from the first
event.

To end assemble editing

Press ASSEMBLE.
All the IN/OUT points are erased.

Editing with LANC cable

Assemble editing

(continued)

Note

• The recording does not stop

the moment you press

stop editing. The source
picture may be recorded a
little longer than you
expected.

Summary of Contents for DHR-1000

















































































































Search results

Summary of Contents for DHR-1000

Reviews:

Related manuals for DHR-1000

Brands by name

Popular brands

Sony DHR-1000, Operating Instructions Manual

Search results

Summary of Contents for DHR-1000

Reviews:

Related manuals for DHR-1000

Brands by name

Popular brands