![background image](http://html.mh-extra.com/html/sony/dhc-flx5d/dhc-flx5d_operating-instructions-manual_420511050.webp)
50
GB
2 channel decoding modes
Pro Logic II only works with 2.1CH (digital)
and 2CH sources. All other sources receive Pro
Logic decoding.
• PRO LOGIC
Performs Pro Logic decoding. The source
recorded in 2 channel is decoded into 4.1
channels.
• PL II MOVIE
Performs Pro Logic II movie mode decoding.
This setting is ideal for movies encoded in
Dolby Surround. In Addition, this mode can
reproduce sound in 5.1 channel when
watching videos of overdubbed or old
movies.
• PL II MUSIC
Performs the Pro Logic II music mode
decoding. This setting is ideal for normal
stereo sources such as CDs.
Before operation, first select the sound effect
you want for your basic sound.
1
On the remote, press DSP EDIT
repeatedly while pressing SHIFT.
Each time you press the button, the display
changes cyclically as follows:
DSP EDIT* (to adjust DSP)
t
EQ EDIT
(to adjust equalizer)
* This menu does not appear depending on the
audio effect.
2
Use the digipad to adjust the
parameters.
The parameter is adjusted according to the
curve your finger slides on the digipad.
Adjustable parameters are described on
page 51. After the curve your finger slides
is displayed for a while, then the curve
automatically adjusted by the unit is
displayed. For DSP EDIT, the adjustable
parameters vary depending on the preset
effect.
3
Press ENTER on the remote.
To cancel
On the remote, press EFFECT repeatedly while
pressing SHIFT to select “EFFECT OFF”. The
adjustment for the selected parameter is
canceled.
Adjusting the sound
effects