![background image](http://html.mh-extra.com/html/sony/dhc-az33d/dhc-az33d_operating-instructions-manual_420507114.webp)
DHC-AZ55D/AZ33D.GB.3-215-548-11(1)
11
GB
There is no sound.
The USB device is not inserted
correctly. Turn off the system, then
reinsert the USB device and check if
“USB MEMORY” is displayed.
The sound is distorted.
The bit rate used when encoding the
MP3 files was low. Send MP3 files
encoded with higher bit rates to the
USB device.
There is noise or the sound skips.
Turn off the system, then reinsert the
USB device.
The music data itself contains noise.
Noise may have been introduced
when creating music data due to the
conditions of the computer. Create the
music data again.
Copy the files to your computer, format
the USB device in FAT12, FAT16, or
FAT32 format, and copy the files to the
USB device again.*
The USB device cannot be inserted
into the (USB) port
.
The USB device is being inserted
backwards. Insert the USB device in
the correct orientation.
The USB device which has been used
on another device does not work.
It may be recorded in an unsupported
format. If so, first take the precaution
of backing up important files on the
USB device by copying them to your
computer hard disk. Next, format the
USB device with a FAT12, FAT16, or
FAT32 file system and transfer the
backed-up audio files onto the USB
device again.*
“Reading” is displayed for a long
time.
It may take a while to finish reading the
USB device if there are many albums
or tracks on it. Thus, we recommend
following these guidelines.
Total albums on USB device: 100 or
less
Total tracks per album: 100 or less
Erroneous display
Send the music data to the USB device
again, as the data stored in the USB
device may have been corrupted.
The character codes that can be
displayed by this system are numbers
and alphabet only. Other characters
appear as “
*
”.
Summary of Contents for DHC-AZ33D
Page 18: ...18GB Display ...