Sony DCRTRV900 - MiniDV Handycam Digital Video Camcorder, Service Manual, Page: 141 / 215

5-38
Table. 5-3-3
Address
89
8A
8B
8C
8D
8E
8F
90 to FF
Initial value
NTSC
58
62
PAL
58
62
Remark
Fixed data-1
Bright adj.(LCD)
Fixed data-2
Contrast adj.(LCD)
Fixed data-2
Fixed data-1
7. Initializing the B Page Data
Note:
If the B page data is initialized, the following adjustments must be
performed again.
1) Modification of B page data
Adjusting page B
Adjusting Address 00 to DF
Initializing Method:
1)
Set the power switch to the MEMORY position.
2) Select page: 0, address: 01, and set data: 01.
3) Select page: 2, address: 8F, set data: 03, and press the PAUSE
button.
4) Select page: 2, address: 8F, set data: 00, and press the PAUSE
button.
5) Select page: 5, address: 01, set data: F3, and press the PAUSE
button.
6) Select page: 5, address: 00, set data: 01, and press the PAUSE
button.
7) Select page: 5, address: 02, and check that the data is “00”.
8) Perform “Modification of B Page Data”.
8. Modification of B Page Data
If the B Page data has been initialized, change the data of the “Fixed
data-2” address shown in the following tables by manual input.
Processing before Modification of B Page data
1)
Select page: 2, address: 8F, set data: 03, and press the PAUSE
button.
2) Select page: 2, address: 8F, set data: 00, and press the PAUSE
button .
Modifying Method:
1)
Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the camcorder may
not operate.
3) When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
Processing after Completing Modification of B Page data
1)
Select page: 2, address: 00, and set data: 29.
2) Select page: 2, address: 01, and set data: 29, and press the
PAUSE button of the adjustment remote commander.
9. B Page Table
Note 1:
Fixed data-1 : Initialized data. ( Refer to “7. Initializing the B
Page Data”.)
Fixed data-2 : Modified data. (Refer to “8. Modification of B PAGE
Data”).
Address
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
10
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
20
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
30
31
32
Remark
Fixed data-1
(Initialized data)