Sony DCRTRV900 - MiniDV Handycam Digital Video Camcorder, Service Manual, Page: 139 / 215

5-36
Address
B5
B6
B7
B8
B9
BA
BB
BC
BD
BE
BF
C0
C1
C2
C3
C4
C5
C6
C7
C8
C9
CA
CB
CC
CD
CE
CF
D0
D1
D2
D3
D4
D5
D6
D7
D8
D9
DA
DB
DC
DD
DE
DF
E0 to FF
Initial value
NTSC PAL
Remark
Fixed data-2
Fixed data-1
Fixed data-2
Fixed data-1
(Initialized data)
Fixed data-2
Fixed data-1
(Initialized data)
Table. 5-3-2
4. Initializing the D Page Data
Note:
If the D page data is initialized, the following adjustments must be
performed again.
1) Modification of D page data
2) Video system adjustments
3) Color electronic viewfinder system adjustments
4) LCD system adjustments
5) IR transmitter adjustments
6) Battery end adjustment
Adjusting page D
Adjusting Address 10 to 8F
Initializing Method:
1)
Select page: 0, address: 01, and set data: 01.
2) Select page: 3, address: 80, set data: 0D, and press the PAUSE
button.
3) Check that the data of page: 3, address: 80 is changed to “1D”.
4) Perform “Modification of D Page Data”.
5. Modification of D Page Data
If the D Page data has been initialized, change the data of the “Fixed
data-2” address shown in the following tables by manual input.
Modifying Method:
1)
Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note:
If copy the data built in the different model, the camcorder may
not operate.
3) When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing after Completing Modification of D Page data
1)
Select page: 2, address: 00, and set data: 29.
2) Select page: 2, address: 01, and set data: 29, and press the
PAUSE button of the adjustment remote commander.
3) Perform the following adjustments.
1)
Video system adjustments
2) Color electronic viewfinder system adjustments
3) LCD system adjustments
4) IR transmitter adjustments
5) Battery end adjustment
6. D Page Table
Note 1: Fixed data-1 : Initialized data. ( Refer to “4. Initializing the D
Page Data”.)
Fixed data-2 : Modified data. (Refer to “5. Modification of D PAGE
Data”).
Address
00 to 0F
10
11
12
13
14
15
16
17
18
Initial value
NTSC
00
PAL
00
Remark
Test mode
Fixed data-1
(Initialized data)
Fixed data-2
(Modified data, copy the data built in
the same model.)
Fixed data-1
(Initialized data)