5-23
DCR-TRV140/TRV140E/TRV140M
10. Angular Velocity Sensor Output Check and
Steadyshot Check
RadarW
RadarW
RadarW
Check the angular velocity sensor output.
Precautions on the Parts Replacement
There are two types of repair parts.
Type A
ENC03JA
Type B
ENC03JB
Replace the broken sensor with a same type sensor. If replace with
other type parts, the image will vibrate up and down or left and
right during hand-shake correction operations.
Precautions on Angular Velocity Sensor
The sensor incorporates a precision oscillator. Handle it with care
as if it dropped, the balance of the oscillator will be disrupted and
operations will not be performed properly.
Mode
CAMERA
Subject
Not required
Measurement Point
Displayed data of page: 1 (Note)
Measuring Instrument
Adjusting remote commander
Specified value
PITCH data: 2900 to 4D00
YAW data: 2900 to 4D00
Note:
The right four digits of the page: 1 displayed data of the
adjusting remote commander.
1:XX:XX
Displayed data
Switch setting:
1) ZOOM ..................................................................... TELE end
2) STEADYSHOT (Menu setting) ........................................ ON
Adjusting method:
Order Page Address Data
Procedure
1
0
03
11
2
1
Check that the displayed data
(Note) satisfied the PITCH
data specified value.
3
0
03
12
4
1
Check that the displayed data
(Note) satisfied the YAW data
specified value.
Processing after Completing Adjustment:
Order Page Address Data
Procedure
1
0
03
00
2
Check that the steadyshot
operations have been
performed normally.