28
Pressing START/STOP or PHOTO does not record movies/still images.
• Slide the POWER switch to light up the
(Movie) or the
(Still) lamp (p.12).
• Your camcorder is recording the image you have just shot on the hard disk of the camcorder.
You cannot press PHOTO while [CAPTURE] or
appears on the LCD screen.
• The hard disk of the camcorder is full. Delete unnecessary images. Or perform [HDD
FORMAT].
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• The temperature of your camcorder is extremely low. With POWER switch turned on, leave
the camcorder for a while. If you still cannot operate the camcorder, turn it off, taking it to a
warm place. Leave the camcorder there for a while, then turn on the camcorder.
The recording stops.
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• The temperature of your camcorder is extremely low. Turn off the camcorder and take it to a
warm place. Leave the camcorder there for a while, then turn on the camcorder.
• The maximum continuous recordable time is approximately approximately 13 hours.
Setup items are grayed out.
• You cannot select grayed out items in the current situation.
The beep sounds for five seconds.
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• Some problems have occurred in your camcorder. Turn off and on, then operate your camcorder
again.
