Sony DCR PC105 - Handycam Camcorder - 1.0 MP Operating Instructions Manual Download Page 43

Page: 43 / 240

Playback

–

Basics

DISPLAY/BATT INFO

DISPLAY

To return to FN

Press EXIT.

To stop playback

Press

To rewind the tape

Press

during playback stop.

To fastforward the tape

Press

during playback stop.

To view a still image (playback pause)

Press

during playback. To resume playback, press

again. If the playback

pause lasts more than 5 minutes, the camcorder automatically stops.

If you leave the power on for a long time

Your camcorder gets warm. This is not a malfunction.

To display the screen indicators – Display function

Press DISPLAY/BATT INFO on your camcorder, or DISPLAY on the Remote
Commander supplied with your camcorder.
The indicators disappear from the screen.
To make the indicators reappear, press DISPLAY/BATT INFO or DISPLAY on the
Remote Commander again.

Playing back a tape

Summary of Contents for DCR PC105 - Handycam Camcorder - 1.0 MP

















































































































































































































































Search results

Summary of Contents for DCR PC105 - Handycam Camcorder - 1.0 MP

Reviews:

Related manuals for DCR PC105 - Handycam Camcorder - 1.0 MP

Brands by name

Popular brands

Sony DCR PC105 - Handycam Camcorder - 1.0 MP, Operating Instructions Manual

Search results

Summary of Contents for DCR PC105 - Handycam Camcorder - 1.0 MP

Reviews:

Related manuals for DCR PC105 - Handycam Camcorder - 1.0 MP

Brands by name

Popular brands