Editing
85
Using the A/V connecting cable
You can dub or edit on the VCR connected to your camcorder using your camcorder as
a player. Connect your camcorder to the VCR using the A/V connecting cable supplied
with your camcorder. The supplied A/V connecting cable is equipped with an S video
plug and a video plug. Use either the S video plug or the video plug depending on the
recorder. Do not connect both of the plugs to the recorder.
Before operation
• Set DISPLAY to LCD in the menu settings. (The default setting is LCD.)
• Press the following buttons to make the indicator disappear so that they will not be
superimposed on the edited tape:
On your camcorder:
DSPL/TOUCH PANEL
On the Remote Commander:
DISPLAY, DATA CODE, SEARCH MODE
(
1
)
Insert a blank tape (or a tape you want to record over) into the VCR, and insert the
recorded tape into your camcorder.
(
2
)
Prepare the VCR for recording, then set the input selector to LINE.
Refer to the operating instructions of the VCR.
(
3
)
Set the POWER switch to VCR.
(
4
)
Play back the recorded tape on your camcorder.
(
5
)
Start recording on the VCR.
Refer to the operating instructions of your VCR.
When you have finished dubbing a tape
Stop recording on the VCR, and stop playback on your camcorder.
— Editing —
Dubbing a tape
S VIDEO
VIDEO
AUDIO
IN
A/V
A/V connecting
cable (supplied)
Yellow
White
Red
: Signal flow
Black
