73
Advanced Recording Operations
3,4
1
OFF
FN
5,6
ON
OK
OK
OK
ON
FADER
PANEL OFF
Turn the LCD panel over and move it back to your camcorder body with the LCD
screen facing out. You can operate with the touch panel using the viewfinder.
Use the viewfinder in the following case:
When operating camera brightness and the fader (only in CAMERA mode) on the touch
panel using the viewfinder
(
1
)
Set the POWER switch to CAMERA or MEMORY/NETWORK (DCR-IP55 only).
(
2
)
Turn the LCD panel over and move it back to your camcorder body with the LCD
screen facing out.
(
3
)
Press
OFF. The message PANEL OFF appears on the LCD screen.
(
4
)
Press OK. The LCD screen is turned off.
(
5
)
Press the LCD screen through the viewfinder. EXPOSURE,
OK,
ON and
FADER (only in CAMERA mode) appear.
(
6
)
Select the desired item, then press
OK.
EXPOSURE: adjust the exposure by pressing –/+.
FADER: press FADER until the desired fader mode is displayed.
The indicator changes as follows:
FADER
t
M. FADER
t
BOUNCE
t
MONOTONE
t
(no indicator)
ON: The LCD screen lights up in the mirror mode.
To make the buttons on the LCD screen disappear
Press
OK.
Using the viewfinder
In CAMERA mode
In MEMORY/
NETWORK (DCR-
IP55 only) mode
