Selecting the connected
component
You can use a VCR or other components
connected to the VIDEO or SAT jacks on the
rear panel. Refer to the operation manual
supplied with the components for further
information on the operation.
Press FUNCTION repeatedly until “VIDEO”
or “SAT” appears in the front panel display.
Each time you press FUNCTION, the mode of
the system changes in the following sequence.
DVD
t
TUNER FM
t
TUNER AM
t
VIDEO
t
SAT
t
DVD
t
…
You can enjoy multiplex broadcast sound when
the system receive the AC-3 multiplex broadcast
signal.
• To receive the AC-3 signal, you need to connect a
digital satellite tuner to the system with an optical
cable (page 35) and set the digital output mode of the
digital satellite tuner to AC-3.
• When you connect the system and TV with the HDMI
cord, this function does not apply to the sound that is
output from the TV. The main sound is output from
the TV. (DAV-FX1000W only)
1
Press AMP MENU.
2
Press
x
/
X
repeatedly until
“DUAL
MONO”
appears in the front panel
display, then press ENTER or
c
.
3
Press
x
/
X
to select the sound you
want.
• MAIN: main sound is output from the left
and right speakers.
• SUB: sub sound is output from the left and
right speakers.
• MAIN+SUB: main sound and Sub sound
are output from the left and right speakers.
Enjoying the Sound of
Other Components
FUNCTION
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
Note
AMP MENU
X/x/c
ENTER
With cover opened.
